Symmetricom 58536A GPS 1x4 4-Way Active Antenna Signal Splitter Divider N Female

Description

Symmetricom 58536A GPS Distribution Amplifier
All 4 units available are brand new and have never been installed or hooked up. They do not have the original boxes as they were part of a kit originally. Shipping is .50 within Continental United States and combined shipping is available if more than one is purchased. International shipping available with eBays global shipping program only. Please message with any questions and thanks for looking.
Introduction
Symmetricom’s Active Splitters allow multiple GPS receivers to share a single antenna. Designed for both manufacturing and position/timing redundancy applications, GPS L1 Active Splitters provide dependable signals for multiple GPS receivers.
For large manufacturing facilities, Symmetricom Active Splitters can provide as many GPS-L1 (1575.42 MHz) signals as your manufacturing floor requires. With built-in amplification to overcome splitter losses, the Active Splitters can be conveniently cascaded without adding separate amplifiers and bias-tees between splitters.
High Isolation Eliminates Receiver Interactions
Symmetricom GPS Active Splitters have the essential port-to-port isolation required to eliminate interaction between multiple GPS receivers. Without such isolation, local oscillator (LO) leakage from one GPS receiver can prevent other receivers from acquiring time and position signals and maintaining lock. In wireless base station pplications, poor isolation can disable cell sites. In GPS manufacturing tests, poor isolation causes repeatability problems which can reduce yields and cause false rework.
Convenient DC Power Simplifies Your Installation
Power is conveniently obtained from the GPS receiver(s) connected to the amplifier. This eliminates the need for a separate dc power supply and wiring. DC power applied to the splitter is also passed on for use by an active antenna, further simplifying your installation.