Hubbell - Kellems Pulling Grip, 033-02-1080, 3.00-3 49" NOS! 48K break strength

Description

One New old stock Kellems grip. 3-3.49".  Grips are a little dusty etc. from shelf life but are otherwise new unused.
033021080
Multiple Strength Pulling Grips are designed for pulling ACSR, aluminum or copper bare conductor, ground wires, messenger strands, wire rope and insulated cables. They are made of high strength galvanized steel strand and feature a multi-weave mesh construction of single, double, and triple weave for firm holding power.
Hubbell Wiring Device-Kellems Product Specifications
Product Type
Pulling Grips
Pulling Grip Type
Overhead
Overhead Type
Multiple Strength Flex Eye
Pulling Grip Color Code
Aluminum
Multiple Strength- Flexible Eye Cable Dia
3.00"-3.49" (7.62-8.86)
Breaking Strength lbs (n)
48000 (215,504)
Approx. Length of Grip
68"
Dimension A
5/8" (1.59) Eye Diameter
Dimension E
18" (45.72)
Dimension M
54" (137.16)
Certifications
CSA Certified
Application
Kellems Multiple Strength Grips are ideal for overhead transmission and distribution line stringing where moderate loading is anticipated. They are economical tools used for attaching conductors to pulling lines and double socking for conductor-to-conductor connections.
Safety Information
The broad application of Kellems grips on a wide variety of objects requires that adequate safety factors be used to establish working loads. The approximate breaking strength of a Kellems grip represents an average calculation based on data established from actual direct tension testing done in our engineering laboratories.
It is impossible to catalog or guarantee a safety factor suitable for all applications as operating conditions are never the same. The tension, diameter, movement, number of objects gripped, gripping surface, and the attachments used are just some of the factors which vary with each application. These factors, together with the effects of abrasion, corrosion, prior use or abuse and any other variables of a specific application, must be considered by the user and the grip replaced as appropriate. Where the conditions of the application are not well defined or known, or where risk of injury to persons or property is involved, a greater safety factor should be utilized.
Under normal conditions, Kellems' recommended factor of safety is five for catalog listed pulling grips, and ten for catalog listed support grips. The factory should be consulted for specific application recommendations where strength and holding power are important factors.
Any warranty as to quality, performance or fitness for use of grips is always premised on the condition that the published breaking strengths apply only to new, unused grips, and that such products are properly stored, handled, used, maintained, and inspected by the user at a frequency appropriate for the use and condition of the grip.
Benefits
Economical, high strength pulling tool.
Multi-weave construction provides greater strength and holding power.
Endless Weave Grip end lies flat on the cable and will not snag.