-40%
GPS glonass receiver DIY Connector 12V RS232, 9600 baud rate,module with
$ 30.06
- Description
- Size Guide
Description
Store CategoriesStore Categories
Other
GPS glonass receiver DIY Connector 12V RS232, 9600 baud rate,module with antenna Line length 5 meters
Details
Line length: 5 meters
cable diameter: 3.5mm
Using high-quality shielded cable design, support for DIY connector.
Applicable to marine navigation, 12V, GNSS GPS GLONASS receiver, RS232, RS-232 GPS receiver, mushroom box, 9600 baud rate, antenna module integrated design. Default GPS mode Built-in Flash, can support change baud rate, NMEA data protocol
Features:
Parameter
Specification
Electrical Characteristics
Chipset
M8030-KT
Receiving Format
GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS
Frequency
GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1
Channels
72 Searching Channel
Sensitivity
Tracking
-167dBm
Reacquisition
-160dBm
Cold start
-148dBm
Hot start
-156dBm
Accuracy
Position Horizontal
2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky)
Velocity
0.1m/sec 95% (SA off)
Timing
1us synchronized to GPS time
Acquisition Time
Cold Start
26s
Warm start
25s
Hot start
1s
Data and Update Rate
Support Rate
Default 9600bps,
4800bps to 921600bps,
Data Level
TTL or RS-232,Default RS-232 level
Data Protocol
NMEA-0183 or UBX, Default NMEA-0183
Single GNSS
1Hz-18Hz
Concurrent GNSS
1Hz-10Hz,Default 1Hz
Operational Limits
Altitude
50,000m Max
Velocity
515m/s Max
Acceleration
Less than 4g
Power consumption
VCC
DC Voltage 24V,Typical:26V
Current
Capture 70mA/24V
Mechanical Specifications
Dimension
ΦO=96mm*124mm
Weight
100g
Connector
DB-9 Female interface
Cable Length
2.0m
Environment
Operating temp
-40 °C ~ +85°C
Storage Temp
-40°C ~ +105°C
If you have special needs, please contact us!
© 2019, All rights reserved