-40%
DIY connector RS232 output protocol baud rate: 15200 gps glonass GNSS GPS
$ 15.81
- Description
- Size Guide
Description
Store CategoriesStore Categories
Other
DIY connector RS232 output protocol baud rate: 15200 gps glonass GNSS GPS receiver Operating voltage: 5V
Details
Default RS232 communication protocol
GN200G is an easy to use, ultra-high performance, low power GNSS smart antenna module with patch antenna for AVL/handheld applications. The built-in 8030 chip and our experienced design provide fast acquisitions and excellent tracking performance.
GN200G supports multiple satellite positioning systems -GPS, GLONASS, Beidou, QZSS and SBAS.GPS, GLONASS, Beidou, QZSS and SBAS.
M
echanical Data
47.5*40*14.5 mm
CableLength:5M
Applications
Automatic vehicle location
Driving recorder
Navigation
GNSS GPS clock and digital camera
Child/elderly/personal locator and security syste
Overview
Windows location sensor support
Receiver Type
72-channel 8030 engine
GPS & QZSS:L1 C/A,1575.42MHz,
GLONASS (GM-8013):
L1OF,
1598.0625~1605.375MHz
BEIDOU (GM-8014):
B1 1561.098 MHz
SBAS: WAAS, EGNOS, MSAS
Horizontal
2.5m (Autonomous)
Position
2.0m (WAAS)
Accuracy
(including SBAS & QZSS; CEP, 50%
24hr static, -130dBm, >6 SVs)
Velocity
0.05 m/s (speed)
Accuracy
<0.3(heading)
(50%@30m/s)
Time Pulse
30ns (RMS)
Signal Accuracy
<60ns (99%)
Time Pulse
Frequency
0.25 Hz ~ 10 MHz
Time To First Fix
Hot start
Cold start
Autonomous
1.5 sec
26 sec
(50% -130dBm)
Sensitivity
(Autonomous)
-148dBm (acquisition)
-167dBm (tracking)
Navigation.
Update Rate
Max. 10Hz, GPS & GLONASS or
GPS & Beidou
Max. 18Hz, GPS only
Default 1Hz
Max. Altitude
50,000 m
Max. Velocity
<1,852 km/hr
Protocol Support
NMEA 0183 v2.3 and V4.x
UART: 4800 bps N,8,1;
GGA, GLL, GSA, GSV, RMC, VTG, TXT
SBAS Support
WAAS, EGNOS, MSAS
RTCM 2.3
Messages 1, 2, 3, 9
Dynamics
<4g
: according to GNSS IC spec using GPS & GLONASS
ElectricalData
Power Supply
3.3 ~ 5.0 V
Power Consumption
40mA/average tracking (TTL)
Backup power
1.4 ~ 3.6 V
15uA
TTL I/O
VIH: 2.31~3.8V, VIL: 0~0.66V
V: ¡Ý2.8V, V¡Ü0.4V
USB I/O
VIH: 2.0~3.3V, VIL: 0~0.8V
VOH: ¡Ý2.8V, VOL¡Ü 0.3V
Protocols
NMEA, u-blox Binary
Environmental Data
Operating temperature
-40 ~ 85 except
battery: -20~60
Storage temperature
-40 ~ 85except
battery: -40~60
Vibration
5Hz to 500Hz, 5g
Shock
Half sine 30g/11ms
Cable length: 5M
Output protocol mode: RS232
Fixed way: N35 magnet + 3M stickers
receiver Type 72-channel 8030 GNSS chip
GPS & QZSS:L1 C/A,1575.42MHz,
GLONASS (GN200G):
L1OF,1598.0625~1605.375MHz
SBAS: WAAS, EGNOS, MSAS
Horizontal 2.5m (Autonomous)
Position 2.0m (WAAS)
Accuracy (including SBAS & QZSS; CEP, 50%
24hr static, -130dBm, >6 SVs)
Velocity 0.05 m/s (speed)
Accuracy <0.3(heading)
(50%@30m/s)
Time Pulse 30ns (RMS)
Signal Accuracy <60ns (99%)
Time Pulse
Frequency 0.25 Hz ~ 10 MHz
Time To First Fix
Hot start 1.5 sec
Cold start Autonomous36 sec
(50% -130dBm)
Sensitivity
(Autonomous) -148dBm (acquisition)
-167dBm (tracking)
Navigation.
Update Rate Max. 10Hz, GPS & GLONASS or
GPS & Beidou
Max. 18Hz, GPS only
Default 1Hz
Max. Altitude 50,000 m
Max. Velocity <1,852 km/hr
Protocol Support NMEA 0183 v2.3 and V4.x
: 9600 bps N,8,1;
GGA, GLL, GSA, GSV, RMC, VTG, TXT
according to GNSS IC spec using GPS & GLONASS
ElectricalData
Power Supply :5.0V
Power Consumption 55mA/average tracking (TTL)
Backup power 1.4 ~ 3.6 V
Protocols
NMEA,0183 Binary
Environmental Data Operating temperature
-40 ~ 85 except
battery: -20~60
Storage temperature
-40 ~ 85except
We can provide a variety of agreements for you to choose, if you need UART and USB protocol, please leave a message or contact us!
© 2019, All rights reserved